Canon imagePRESS C7011VPS series Operation Manual Download Page 380

Page: 380 / 391

Library for SDE Compiler

* 1/4 University of California, Berkeley

Redistribution and use in source and binary forms are permitted

provided that the above copyright notice and this paragraph are

duplicated in all such forms and that any documentation,

advertising materials, and other materials related to such

distribution and use acknowledge that the software was developed

by the University of California, Berkeley. The name of the

University may not be used to endorse or promote products derived

from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR

IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

* 2/4 David M. Gay at AT&T

The author of this software is David M. Gay.

Permission to use, copy, modify, and distribute this software for any

purpose without fee is hereby granted, provided that this entire notice

is included in all copies of any software which is or includes a copy

or modification of this software and in all copies of the supporting

documentation for such software.

THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED

WARRANTY. IN PARTICULAR, NEITHER THE AUTHOR NOR AT&T MAKES ANY

REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE

MERCHANTABILITY

OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.

* 3/4 Sun Microsystems

Developed at SunPro, a Sun Microsystems, Inc. business.

Permission to use, copy, modify, and distribute this

software is freely granted, provided that this notice

is preserved.

* 4/4 Unless otherwise stated in each remaining newlib file, the

remaining files in the newlib subdirectory are governed by the following

Library for SDE Compiler

380

Chapter 16 - Third-Party Software

Summary of Contents for imagePRESS C7011VPS series








































































































































































































































































































































































































Search results

Summary of Contents for imagePRESS C7011VPS series

Reviews:

Related manuals for imagePRESS C7011VPS series

Brands by name

Popular brands

Canon imagePRESS C7011VPS series, Operation Manual

Search results

Summary of Contents for imagePRESS C7011VPS series

Reviews:

Related manuals for imagePRESS C7011VPS series

Brands by name

Popular brands