![background image](http://html.mh-extra.com/html/canon/imageformula-scanfront-400/imageformula-scanfront-400_set-up-and-operation-manual_63007027.webp)
Chapter 2 ScanFront Setup
27
❏
Turning the Power OFF
Press the [Power off] button displayed at the bottom left of
the panel to turn the scanner OFF.
IMPORTANT
• When restarting the scanner, wait at least 5 seconds after
turning the power OFF before turning it ON again.
• If the scanner stops responding, you can press and hold the
power button to force shutdown. In such cases, any
configured settings may be lost and startup may not be
possible. Pressing and holding the power button to force
shutdown may result in malfunction, so do not perform this
operation under normal circumstances.
• After ScanFront transitions to Low Power Mode while not
connected to a network, power will automatically turn OFF
when the scanner is not operated for approximately 4 hours.
Summary of Contents for imageFORMULA ScanFront 400
