![background image](http://html1.mh-extra.com/html/tokenworks/cardvisor-id/cardvisor-id_quick-start-manual_1124927001.webp)
CardVisor
®
ID Scanner Quick Start Guide
See the
Hardware User Manual
for more information on using the ID Scanner and
the
Software User Manual
for how to transfer data to a PC.
1. Install fresh alkaline batteries into the
Handspring
Visor handheld. Palm Logo should
appear on the screen in 2-3 seconds. If not, see
troubleshooting guide in
Hardware User Manual
.
2. Using the Stylus, follow on screen prompts to
center digitizer by tapping on the ‘X’s displayed on
screen, continue and then tap on the
dotted box
around the displayed date and/or time. This will
launch a menus/calendars to adjust current time.
Date/Time must be correct for proper operation.
3. Insert the CardTool
®
magnetic card reader into the expansion slot of the Visor.
4. The CardVisor
®
Age Verification application will
auto-load a Welcome screen - Press the Date Book
button to launch ID Scanner. The DateBook key is
the bottom left round button with “1” printed on it.
“Swipe-A-Card” should display at the bottom of the
main screen.
5. Swipe a driver’s license and review main screen display.
(Bar Code Customer Continue on Next Page)