![background image](http://html.mh-extra.com/html/canon/imageformula-scanfront-300p/imageformula-scanfront-300p_instructions-manual_63004142.webp)
7-7
Chapter 7 ScanFront Administration Tool
❏
Changing IP Addresses and Device
Names
Double-click a ScanFront scanner in the list to display the
[IP Address / Device Name] dialog box, and then change
the IP address or device name of the selected ScanFront.
After you enter the IP address or device name and click
[OK], the dialog box will close, and the specified IP
address or device name will be applied.
❏
Checking Detailed Information on the
ScanFront
Click the [Check Details] button that appears for the
ScanFront scanners registered in the list to display the
[Details] window.
IMPORTANT
You can only perform this operation for ScanFront scanners to
which ScanFront Administration Tool is able to connect.
A list of users registered to the ScanFront appears in the
[Details] window.
You can use the following buttons in the window to
manage the users registered to the ScanFront.
• To select a user for an operation, select the check box that
appears at the far left of each row. Clicking [Select All]
or [Except All] selects or clears all of the user check
boxes in the list, respectively.
• Click [Back up] to backup configuration data for users
selected in the list to any location on the computer.
• Click [Delete] to delete the users selected in the list.
• Click [Version Info] to display version information for
the ScanFront.
• Click [Back] to close the [Details] window.
❏
Displaying the Web Menu
When you select a ScanFront scanner in the list and click
the [Open Web Menu] button, the Web browser starts and
the Web Menu for the selected ScanFront is displayed.
IMPORTANT
You can only perform this operation for ScanFront scanners to
which ScanFront Administration Tool is able to connect.
❏
Batch Processing
You can select multiple ScanFront scanners in the list, and
select a command in the [Processing] menu to perform the
same operation all of the selected ScanFront scanners at
one time.
The following commands are available in the [Processing]
menu.
[Restore All Settings]
Load backed up ScanFront data stored on the computer,
and restore settings on all selected ScanFront scanners.
[Backup All Settings]
Save the backup data of all selected ScanFront scanners to
any location on the computer.
[Import User Data]
Load ScanFront user data stored on the computer, and
register it to all selected ScanFront scanners.