![background image](http://html.mh-extra.com/html/canon/imageformula-scanfront-300p/imageformula-scanfront-300p_instructions-manual_63004134.webp)
6-42
Chapter 6 Web Menu (Administrator Mode)
3.
Click [Browse], and specify the update file to use.
4.
Click [Version Up].
5.
Confirm the message that appears, and click [OK] to
perform the version update.
IMPORTANT
• It takes several minutes to transfer the update file to the
scanner. Do not operate the Web Menu or scanner until the
Web Menu changes to the following display.
• Version update may take longer if a large quantity of setting
information is set on the scanner.
6.
Click [OK] to close the Web Menu.
IMPORTANT
When the update file finishes transferring, the version update
starts. Do not operate the scanner until the version update is
complete and the scanner restarts.
7.
Configure the IP address, and then restore the
backup file from the Web Menu.
❏
Log Settings
You can configure settings for log files.
Hint
• ScanFront Service is not used for log settings.
• The log file is a text file in CSV format. You can view the
information of the log file in an application that supports CSV
format.
Make Log File
Select this check box to create a log file.
PC Name (Host Name)
Enter the name of the computer containing the publicly
shared folder where the log file will be saved.
Location
Enter the name of the shared folder. You can also press
[Browse] to select a folder to save.
User name/Password
Enter the name and password of a user with the authority
to write data to the shared folder.
Domain/Workgroup
If the computer containing the shared folder is part of a
domain, enter the domain name.
IMPORTANT
If the computer containing the shared folder is part of a domain,
enter the user name and password registered with the domain,
and the domain name.
File name
Enter a name for the log file.