![background image](http://html2.mh-extra.com/html/canon/imageformula-dr-g2140/imageformula-dr-g2140_user-manual_4238721070.webp)
70
Staple Detection
Enable/disable staple detection in Count Only Mode.
On
: Staple detection is enabled in Count Only Mode.
Off
: Staple detection is disabled in Count Only Mode.
Start
When [Start] is selected, the documents are fed and counting is
started.
Count Clear
Select [Reset] to reset the count in the display count area (bottom right
on the display).
Imprint Test
Select the following menu items to make settings related to the
optional imprinter.
This is displayed only when the optional Imprinter is installed.
Font
Select the font for imprinter test printing.
It can be set in three stages: [12×12 (Normal)], [8×12 (Normal)], or
[12×12 (Thin)].
Head Cleaning
Select [Start] to execute imprinter head cleaning.
Start
Select [Start] to execute imprinter test printing.
0HQX86%
͍
6FDQ6HWWLQJ
&RXQW2QO\
&RXQW&OHDU
0HQX86%
͍
&RXQW2QO\
&RXQW&OHDU
,PSULQW7HVW