57
Count the Number of Document
Sheets
This function counts the number of document sheets before scanning.
Count-Only Mode
The number of loaded document sheets is counted by simply feeding
them through the scanner.
Hint
The Count-Only Mode is executed from the operation panel, and can
be used to count document sheets even when no computer is
connected.
1
Place the document.
2
Press the Menu key on the operation panel.
User Mode is activated.
"User Mode Operations" (See p. 61)
3
Press the
▲▼
keys to select [Count Only], and press
[OK].
Count-Only Mode is enabled.
Hint
If "Count Only" is assigned to the Function key, press the Function
key to enable Count-Only Mode.
4
Press the
▲▼
keys to select [Start], and press [OK].
Document counting starts.
Hint
To stop document feeding, press the Stop key.
Verify Scan
The scanner compares the document page count obtained from the
Count-Only Mode (or entered manually) with the actual count of
document pages scanned, and an error message is displayed if the
two counts do not match.
1
Open the scanner driver's setting screen.
2
On the [Feeding] tab sheet, select the [Verify Count]
check box.