158
Cleaning the Ink Cartridges
If the imprinter print head nozzles are dirty, printing may become
streaked or spotty. To prevent this, periodically remove the ink
cartridge and clean the print head with a soft, dry cloth or cotton swab.
CAUTION
Do not touch the metal contacts on the ink cartridge. Doing so may
cause poor connections, resulting in poor print quality.
Imprinter Testing
After replacing an ink cartridge or cleaning the print head, perform a
test print to confirm proper printing. Test printing is performed by the
[Imprint Test] User Mode selection.
IMPORTANT
Before performing an Imprinter Test, load a sheet of paper into the
Document Feed Tray.
Performing an Imprinter Test
Use the following procedure to execute the Imprinter Test.
1
Load a sheet of paper into the Document Feed Tray for
test printing.
2
Press the Menu key on the operation panel.
User Mode is activated.
