background image

6

Before Using the Scanner

Moving the Scanner

• When moving the scanner, always hold it with both hands to avoid 

dropping it. The scanner weighs approximately 14.3 lb (6.5 kg).

CAUTION

• Make sure to disconnect the interface cable and power cord when 

moving the scanner. If the scanner is transported with these items 

plugged in, the plugs and connectors may be damaged.

Handling

WARNING

Note the following precautions whenever using the scanner. Failure 

to do so may result in a fire or electric shock.

Never use alcohol, benzene, paint thinner, aerosol sprays, or any 

other highly flammable substance near the scanner.

Do not cut, damage, or modify the power cord. Do not place heavy 

objects on the power cord, and do not pull or excessively bend the 

power cord.

Never connect the power cord when your hands are wet.

Do not connect the scanner to a multi plug power strip.

Do not knot or coil the power cord as this may result in a fire or 

electric shock. When connecting the power cord, make sure that 

the power plug is securely and completely inserted into the power 

outlet.

Do not use power cords other than the power cord provided with 

this scanner.

Never try to take the scanner apart or modify it in any way, as this 

is dangerous and may lead to a fire or electric shock.

Summary of Contents for imageFormula DR-6010C






























































Reviews: