Canon imageFormula CR-120 User Manual Download Page 68

Page: 68 / 82

Check Path Cleaning

Follow the procedures below to perform check path cleaning.

Confirm that the scanner is set to the cleaning mode. (See
“Prepare for the Cleaning mode,” on p. 67)

Press the Separation OFF Mode Button.

Place the cleaning card (for Check Path Cleaning) in the
document tray.

Press the Start Button to start cleaning.

Please repeat steps 3 and 4.

A typical cleaning is feeding the cleaning card 3 to 7 times. If the
scanner is extremely dirty, you may need to use another cleaning
card.

Turn OFF the scanner.

NOTE

Allow 1 to 2 minutes for the moisture on the Canon CR-Series scanner from
the cleaning card to thoroughly dry before scanning documents.

Card Path Cleaning

Follow the procedures below to perform card path cleaning.

NOTE

When insert the cleaning card (for Card Path Cleaning), use of card guard is
recommended. See “About the Card Guard,” on p. 48

Confirm that the scanner is set to the cleaning mode. (See
“Prepare for the Cleaning mode,” on p. 67)

Press and hold the FUNCTION Button.

Press and hold the Function button for at least 2 seconds, and then
release it.

If the scanner is set to the Card Path Cleaning mode properly, the
POWER LED and the Start LED continues to blink.

Separation OFF
Mode Button

Summary of Contents for imageFormula CR-120



















































































Search results

Summary of Contents for imageFormula CR-120

Reviews:

Related manuals for imageFormula CR-120

Brands by name

Popular brands

Canon imageFormula CR-120, User Manual

Search results

Summary of Contents for imageFormula CR-120

Reviews:

Related manuals for imageFormula CR-120

Brands by name

Popular brands