background image

20

4

Click the [Feeding] tab.

5

Set [Feeding Option] to [Panel-Feeding].

6

Click [OK] to close the settings screen.

7

Click [OK] to close the scanner settings dialog box.

8

Place the document in the scanner, and start the scan 
procedure from the application.

9

Press the start button on the scanner in which the 
document is placed.

If the document is placed in the Canon document scanner, 
pressing the start button on the scanner will start the scan 
procedure.
If the document is placed on the flatbed, pressing the start button 
on the flatbed will start the scan procedure.
When the document finishes scanning, the scanner waits for the 
next document to be placed.

10

Place the next document to be scanned.

If you selected [Auto] for [Main Scanner/Flatbed] in step 2, you 
can place the document in either the feeder or the flatbed to 
continue scanning.

11

Repeat steps 9 and 10 until all documents are scanned.

12

Press the stop button on the scanner when all documents 
have been scanned.

This completes the scan procedure.

NOTE

Depending on the application you are using and whether the flatbed 
is connected, scanner operations when scanning with the [Feeding 
Option] set to [Panel-Feeding] may differ as follows.

When scanning with only a 

Canon document scanner

When scanning with the 

flatbed connected

When you press the stop button 
on the scanner, a dialog box 
asking whether you want to 
continue scanning appears.

You must press the stop button 
on the scanner twice to display 
the dialog box that asks whether 
you want to continue scanning.

When you select the option to 
continue scanning in the above 
dialog box, the driver settings 
screen appears automatically.

Selecting the option to continue 
scanning will not automatically 
display the driver settings 
screen. You must press the start 
button on the scanner.

Summary of Contents for ImageFORMULA 102




























Reviews: