background image

18

[Page Size]

Select the page size of the document to be scanned.
If you select [Match original size], the document size is detected 
automatically. The [Settings] button is enabled in such cases, and by 
clicking the button and displaying the dialog box, you can configure 
the size detection area (legal, A4, or A5R area) according to the 
document to be scanned. 

[Dots per inch]

Specify the scanning resolution.

[Brightness]

Adjust the brightness of scanned images.

[Contrast]

Adjust the contrast of scanned images.

[Scanning Side]

When scanning documents placed in the feeder of the connected 
Canon document scanner, select which sides of a document to scan.

[Automatically straightens skewed images]

Click to ensure that if a document is scanned at an angle, the slant is 
detected and straightened out in the scanned image.

[Area]

Click this to display a dialog box for specifying the area of the 
document to scan.

[More]

Click this to display the settings dialog box for the connected Canon 
document scanner, and configure advanced scan conditions. For 
details on settings, refer to the 

Help for the ISIS/TWAIN driver

.

[Default]

Return all configurations in the settings dialog box to their default 
values.

Summary of Contents for ImageFORMULA 102




























Reviews: