manualshive.com logo in svg

Canon imageCLASS MF4890dw, Service Manual, Page: 441 / 511

Share
Download
Canon imageCLASS MF4890dw Service Manual Download Page 441

4

4

4-365

4-365

Disassembly/Assembly > Pickup And Feeding System > Removing the Pickup Tray Unit (MF4780w/MF4770n/MF4750/MF4730) > Procedure

Disassembly/Assembly > Pickup And Feeding System > Removing the Pickup Tray Unit (MF4780w/MF4770n/MF4750/MF4730) > Procedure

Note:
The below picture shows how to wind the harness.

F-4-1003

Removing the Pickup Tray Unit (MF4780w/MF4770n/
MF4750/MF4730)

 

■

Preparation

1) Remove the left cover
2)Remove the SADF unit and reader unit.
3)Remove the right cover
4)Remove the front cover unit.
5)Remove the upper cover.
6)Remove the duplex feed unit
7)Remove the separation pad

 

■

Procedure

1)Remove the 4 screws(black TP)[1] and 6 screws[2].

x10

[2]

[2]

[1]

2) Remove the pickup tray unit [1].
• 2 boss holes [2]
• 2 hooks [3]
• 2 bosses [4]

F-4-1004

Summary of Contents for imageCLASS MF4890dw
































































































































































































































































































































































































































































































































Reviews:

No comments