Canon imageCLASS MF4890dw Service Manual Download Page 170

Page: 170 / 511

4-94

Disassembly/Assembly > Document Exposure/Feeder System > Removing the SADF Unit (MF4780w/MF4770n/MF4750/MF4730) > Procedure

Caution:

Be sure to hold the connector cover when removing it.

[2]

[3]

[1]

Caution:

Before installing the connector cover, be sure to store the harness, grounding wire,
and flat cable in the [A] part.

[A]

2)Free the reader harness[1] from the cut-off[A]

[A]

[1]

3)Release the lock[1] on the lower left front side of the reader unit, and open the SADF unit[2]

[1]

F-4-223

F-4-224

Summary of Contents for imageCLASS MF4890dw
































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageCLASS MF4890dw

Reviews:

Canon imageCLASS MF4890dw, Service Manual, Page: 170 / 511

Search results

Summary of Contents for imageCLASS MF4890dw

Reviews: