Canon imageCLASS MF273dw User Manual Download Page 398

Page: 398 / 633

[On]

[Format Host Resources MIB to RFC2790]

[Off]
[

]

[Dedicated Port Settings]

[Menu] [Preferences] [Network]

Specify whether to use a dedicated port.

Use a dedicated port for tasks such as printing from a computer, scanning using the MF Scan Utility, and configuring

or browsing the machine’s settings.

[Off]
[

]

[Dedicated Port Authentication Method]

[Menu] [Preferences] [Network]

Set the authentication method when using a dedicated port.

If you specify [Mode 2], communication via the dedicated port will be limited to secure authentication methods only.

This may mean that you cannot connect to the machine from device management software, drivers or other software.

[

Mode 1

]

[Mode 2]

[Waiting Time for Connection at Startup]

[Menu] [Preferences] [Network]

Set the waiting time until a connection is established when the machine starts up.

If the machine is connected via a device such as a switching hub, you may not be able to connect to the network even

when the setting on the machine is correct. If so, set the waiting time and reconnect.

to 300 (sec.)

[Ethernet Driver Settings]

[Menu] [Preferences] [Network]

Set the Ethernet communication method. Manually Configuring the Ethernet Settings(P. 78)

This also allows you to check the MAC address on a wired LAN. Viewing the MAC Address of the Wired LAN(P. 91)

[Auto Detect]

[Off]

[Communication Mode]

[

Half Duplex

]

[Full Duplex]

[Ethernet Type]

[

10BASE-T

]

[100BASE-TX]

Settings Menu Items

389

Summary of Contents for imageCLASS MF273dw


























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageCLASS MF273dw

Reviews:

Related manuals for imageCLASS MF273dw

Brands by name

Popular brands

Canon imageCLASS MF273dw, User Manual

Search results

Summary of Contents for imageCLASS MF273dw

Reviews:

Related manuals for imageCLASS MF273dw

Brands by name

Popular brands