Canon imageclass MF232W User Manual Download Page 46

Page: 46 / 477

Spread the document guides apart.

●

Slide the document guides outward until they are slightly farther apart than the actual document width.

Fan the document stack and align the edges.

●

Fan the document stack in small batches, and align the edges by lightly tapping the stack on a flat surface a
few times.

Place the document(s) face up in the feeder.

●

Make sure that the document stack does not exceed the load limit guide (

●

Do not load documents of various sizes at the same time.

●

Up to 35 sheets can be loaded at a time. If 35 or more sheets are loaded, scanning may stop or a paper
jam may occur.

Align the document guides against the edges of the document.

●

Slide the document guides inward until they are aligned securely against the edges of the document.

Basic Operations

Summary of Contents for imageclass MF232W






























































































































































































































































































































































































































































































Search results

Summary of Contents for imageclass MF232W

Reviews:

Brands by name

Popular brands

Canon imageclass MF232W, User Manual

Search results

Summary of Contents for imageclass MF232W

Reviews:

Brands by name

Popular brands