manualshive.com logo in svg

Canon imageclass MF232W, User Manual

Share
Download
Canon imageclass MF232W User Manual Download Page 354

Cart. Comm. Error A counterfeit or non-Canon cartridge may be in use.

Toner cartridge is not installed correctly, or there is possible trouble on the toner cartridge.

●

Reinstall the toner cartridge. If this message does not disappear after reinstalling several times, the toner
cartridge might be possibly broken. Contact the shop where you purchased the machine, or the Canon
Customer Care Center.

How to Replace Toner Cartridges(P. 390)

You might not be using a Canon genuine toner cartridge.

●

We recommend Canon genuine toner cartridges as replacement toner cartridges.

Consumables(P. 424)

Cart. end of lifetime. Rplcmt. recommended.

The toner cartridge has reached the end of its lifetime.

●

Replacement of the toner cartridge is recommended.

How to Replace Toner Cartridges(P. 390)

Check the authentication settings.

The authentication method set on the machine does not match the authentication method set on the

RADIUS server.

●

Check  that  the  same  authentication  method  is  set  on  this  machine  and  the  RADIUS  server,  and  set  the
correct authentication method.

Configuring IEEE 802.1X Authentication(P. 252)

Could not connect. Check the PSK settings.

The network key (PSK) of a wireless router to be connected is not set to the machine correctly.

●

Check the network key (PSK) of the wireless router, and set it to the machine again.

Checking the SSID and Network Key(P. 184)
Setting Up Connection by Selecting a Wireless Router(P. 177)
Setting Up Connection by Specifying Detailed Settings(P. 180)

●

If  the  problem  persists  even  after  checking  the  network  key,  check  whether  the  machine  is  properly
installed and ready to connect to the network.

Installation/Settings Problems(P. 356)

Could not connect using Access Point Mode.

Connection in Access Point Mode failed due to an error.

●

Wait a few moments and try again. If you still cannot connect, try switching the machine off briefly.

Troubleshooting

348

Summary of Contents for imageclass MF232W






























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands