Canon imageCLASS LBP121dn User Manual Download Page 343

Page: 343 / 388

An Error Code Is Displayed

95LW-089

If printing cannot be performed, or another error occurs, an error code (three-digit number starting with "#") is

displayed in the job log.

Select the error code from the list below, and check how to troubleshoot the problem.

#001 to #099

#037(P. 336) #099(P. 336)

#701 to #799

#753(P. 336) #766(P. 337)

#801 to #899

#852(P. 337) #853(P. 337) #861(P. 337) #863(P. 337)

#901 to #999

#934(P. 338)

●

If the problem persists even after trying the troubleshooting methods, contact your dealer or service
representative. If the Problem Persists(P. 339)

#037

Printing could not be performed due to the file size.

Reduce the File Size or Divide the File.

Optimize the file to make it smaller, or divide the file and then print it.

#099

The job was canceled.

This does not indicate a malfunction. Perform the operation again, as needed.

#753

The machine was unable to connect to the network due to a disconnected Ethernet cable.

Check That the Ethernet Cable Is Properly Connected.

Troubleshooting

336

Summary of Contents for imageCLASS LBP121dn





































































































































































































































































































































































































Search results

Summary of Contents for imageCLASS LBP121dn

Reviews:

Related manuals for imageCLASS LBP121dn

Brands by name

Popular brands

Canon imageCLASS LBP121dn, User Manual

Search results

Summary of Contents for imageCLASS LBP121dn

Reviews:

Related manuals for imageCLASS LBP121dn

Brands by name

Popular brands