Canon imageCLASS LBP121dn User Manual Download Page 290

Page: 290 / 388

Printing Is Uneven

95LW-06S

Troubleshoot by checking in the following order:

Step 1: Checking the Paper(P. 283)
Step 2: Checking the Toner Cartridge(P. 283)
Step 3: Checking the Usage Environment of the Machine(P. 283)

Step 1: Checking the Paper

Are You Using Appropriate Paper?

Check whether the paper in the machine is usable, and replace it with appropriate paper, as needed.

Usable Paper(P. 13)

Loading Paper(P. 87)

Step 2: Checking the Toner Cartridge

Check the Remaining Amount of Toner in the Toner Cartridge.

If the remaining amount of toner in the toner cartridge is low, replace the toner cartridge.

Checking the Remaining Amount of Consumables(P. 262)

Replacing the Toner Cartridge(P. 257)

* Depending on the usage condition of the machine, the actual remaining amount of toner may be lower than

indicated or the parts may be deteriorated.

Step 3: Checking the Usage Environment of the Machine

Are You Using the Machine in a Humid Environment?

Setting [High Humidity Mode] to [On] may solve the problem.

[Home] screen on the operation panel [Menu]

[Adjustment/Maintenance]

[Adjust Image

Quality]

[Special Processing]

[High Humidity Mode]

[On]

* Setting this to [On] may blur images and text in an environment with low humidity.

Are You Using the Machine in an Environment with Sudden Temperature Changes?

Sudden temperature changes can create condensation, which can result in faded or blurry images and text.

Continuing to use the machine under these conditions may result in paper jams, printing defects, faults, or

other problems. Allow the machine to adjust to the ambient temperature and humidity for at least 2 hours

before use.

Is the Machine Installed in a Location Subject to Strong Wind Such as from an Air
Conditioner?

If so, adjust the air direction and volume of the air conditioner.

If that does not work, setting [Switch Paper Feed Method] to [Print Side Priority] may improve the problem.

[Home] on the operation panel [Menu]

[Function Settings]

[Common]

[Paper

Feed Settings]

[Switch Paper Feed Method]

[Drawer 1]

[Print Side Priority]

Troubleshooting

283

Summary of Contents for imageCLASS LBP121dn





































































































































































































































































































































































































Search results

Summary of Contents for imageCLASS LBP121dn

Reviews:

Related manuals for imageCLASS LBP121dn

Brands by name

Popular brands

Canon imageCLASS LBP121dn, User Manual

Search results

Summary of Contents for imageCLASS LBP121dn

Reviews:

Related manuals for imageCLASS LBP121dn

Brands by name

Popular brands