Canon imageCLASS LBP121dn User Manual Download

Page: 264 / 388

Replacing the Toner Cartridge

95LW-067

Replace the toner cartridge at the appropriate time according to messages that appear and a change in print quality.

Before replacing the toner cartridge, check the precautions in Important Safety Instructions. Manuals of the

When to Replace the Toner Cartridge(P. 258)
Before Replacing Toner Cartridge(P. 258)
Replacing Toner Cartridge(P. 260)

●

Do not touch the contacts (

) inside the machine. Doing so may result in a fault.

●

Be sure to hold the toner cartridge using the handle.

●

Do not scratch the drum surface (

) or expose it to light. Also, do not touch the electrical contacts (

) or

the toner cartridge memory (

Maintenance

257

Summary of Contents for imageCLASS LBP121dn





































































































































































































































































































































































































Search results

Summary of Contents for imageCLASS LBP121dn

Reviews:

Related manuals for imageCLASS LBP121dn

Brands by name

Popular brands

Canon imageCLASS LBP121dn, User Manual

Search results

Summary of Contents for imageCLASS LBP121dn

Reviews:

Related manuals for imageCLASS LBP121dn

Brands by name

Popular brands