manualshive.com logo in svg

Canon imageCLASS D860, Fax Manual, Page: 77 / 85

Share
Download
Canon imageCLASS D860 Fax Manual Download Page 77

9-9

ADD. REGISTRATION

1-TOUCH SPD DIAL

Registers the information on One-Touch Speed Dialing. 
(

→

p. 3-1)

1-TOUCH SPD DIAL

Selects a one-touch speed dialing key.

1.TEL NUMBER ENTRY

Registers the other party’s telephone number.

2.NAME

Registers the other party’s name.

3.OPTIONAL SETTING

The transmission time and settings including the
registration of passwords and subaddresses can be specified.

ON

The optional settings can be set.

1.TX TIME SETTING

Five settings of the transmission times can be specified.

Setting procedure
1

Select the time setting number (1 to 5) by repeatedly
pressing

Set

, and press 

Set

again.

2

Enter the hour and minute for the transmission time
using the numeric keys, then press 

Set

. (Enter all four

digits of the hour and minute settings. For example,
enter “0905” for 9:05 am.)
• If you make a mistake when entering the time, press

Function

and

Clear

, then enter the correct time.

Sending procedure
1

Place the document face down in the ADF or on the
platen glass.

2

Press the one-touch speed dialing key containing the
set transmission time. The document is scanned and
stored in memory.

The machine transmits the document at the transmission
time. If you have set more than two transmission time
settings, the document will be transmitted at the preset time
closest to the time that the document has been scanned.
Once you set the transmission time, the machine will
transmit the document at the same time on every day.
However, you cannot use the one-touch speed dialing key to
send the document as usual, and cannot send the document
any time unless you cancel the transmission time setting.
To cancel the setting, press 

Set

in

TX TIME SETTING

to

select the preset time, and press 

Set

again. Then, press

Function

and

Clear

, and press 

Set

. The preset time is

canceled.
If you have set more than two transmission time settings,
repeat this procedure to delete all the preset times. Or. when

OFF

is selected in 

OPTIONAL SETTING

,

TX TIME

SETTING

and

TX TYPE

are canceled. You do not need to

delete all of the preset times.

2.TX TYPE

REGULAR TX

: For a normal transmission. 

SUBADDRESS TX

: For a subaddress transmission.

Registers passwords and subaddresses.

POLLING RX

: For a polling reception. Registers

passwords and subaddresses.

OFF

No setting.

9

Setting the Additional Functions

Name

Description

(The factory default setting is in 

bold

face.)

09 FAX_Chp9.qxd  6/17/04 2:37 PM  Page 9-9

Summary of Contents for imageCLASS D860






















































































Reviews:

No comments