manualshive.com logo in svg

Canon ImageCLASS D420, Basic Operation Manual

Share
Download
Canon ImageCLASS D420 Basic Operation Manual Download Page 211

11-8

Tr

oubleshooting 

Clearing Jams

  10

10

  Insert the toner cartridge so that the 

protrusion on the right side of the toner 
cartridge (A) fits into the guide (B) located 
on the right side of the machine and slide 
it down parallel to the guide. 

 

 

  11

11

  Push down the toner cartridge to make 

sure it is properly set in the machine. 

 

 

  12

12

  Hold the grip (A) on the right front side of 

the toner cover. 

 

 

  13

13

  Close the toner cover. 

 

 

  14

14

  Lower the scanning platform. 

 

 

Be careful not to get your fingers caught.
If you cannot close the toner cover, do not force 
it to close. Open the cover and make sure the 
toner cartridge is properly set in the machine.

–
–

  15

15

  Remove the dust cover from the paper 

cassette. 

 

 

Summary of Contents for ImageCLASS D420





























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands