manualshive.com logo in svg

Canon ImageCLASS D420, Basic Operation Manual

Share
Download
Canon ImageCLASS D420 Basic Operation Manual Download Page 187

10-14

M

aint

enanc

e 

Replacing the Toner Cartridge

 6

 

Take out the new toner cartridge from the 
protective bag. 

 

 

Do not open the drum protective shutter (A). Print 
quality may deteriorate if the drum surface is 
exposed to light or is damaged.

Save the protective bag. You may need it later 
when you remove the toner cartridge from the 
machine.

 7

 

Gently rock the toner cartridge several 
times to evenly distribute toner inside. 

 

 

 8

 

Place the toner cartridge on a flat surface 
and pull the seal completely out. 

 

 

Do not pull the seal out at an angle.

If toner is adhered on the removed seal, be 
careful that your hands or clothes do not get 
dirty from touching the toner.
If your hands or clothes get dirty from touching 
the toner, wash them immediately in cold 
water. Do not use hot water. If you do, the toner 
may be set permanently.

–

–

Summary of Contents for ImageCLASS D420





























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands