Canon IMAGE RUNNER 5050, Network Manual

Page: 44 / 240

Communication Environment Setup 2-16
2
Settings Common
to t
h
e Netw
or
k
Protocols
4
On the Network Settings screen, press [Enable Dedicated
Port]
➞
specify the following.
[On]: You can set or browse detailed information on the machine with a Canon
printer driver or utility (UFR II/PCL/PS printer drivers, NetSpot Device Installer,
etc.).
IMPORTANT
•
If you want to use a Canon printer driver or utility, press [On] for both <Use SNMP
v. 1> and [Enable Dedicated Port].
•
You can restrict the IP addresses of computers on which items can be set or
browsed. If you restrict the IP addresses, it is not possible to set or browse detailed
information concerning the machine on computers other than those whose IP
addresses are allowed, even if <Use SNMP v. 1>, <Use SNMP v. 3>, and [Enable
Dedicated Port] are 'On'. For details, see "TCP/IP Settings (IPv4)," on p. 3-3 or
"TCP/IP Settings (IPv6)," on p. 3-18.
•
IPv6 is not supported.
5
On the Network Settings screen, press [Use Spooler]
➞
specify the following.
[On]: You can spool print jobs transmitted to this machine on the machine's hard
disk. Set the spooler if you are using the optional UFR II/PCL/PS Printer Kit or the
optional Super G3 FAX Board.