1 - 7
3.2 Adjustments
3.2.1 Waste ink counter setting
(1) When replacing the logic board, replace the waste ink absorber, depending on the value of the waste ink
counter.
Use the following table as a guide to replacement.
7DEOH:DVWH,QN$EVRUEHU5HSODFHPHQW7LPLQJDQG:DVWH,QN&RXQWHU6HWWLQJ
Waste ink counter setting
i550 / i850 / i950
0 - 7
7 - 100
Clear waste ink counter
Clear waste ink counter and replace waste ink absorber
Print the EEPROM information in service mode to check the waste ink count.
(2) PIXUS 950i waste ink counter clearing method
After selecting the waste ink counter setting via the service mode function (for details, refer to 3.3.2), press
the Power button. Then, without pressing the Resume button, press the Power button once again.
3.2.2 Resetting EEPROM
When the EEPROM is reset, the entire contents of the EEPROM is cleared (excluding the following items).
<i550 / i850>
- USB-S/N
- Waste ink counter
<i950>
- USB-S/N
Summary of Contents for i550
