Canon i-SENSYS LBP151dw User Manual Download Page 43

Page: 43 / 335

Loading Envelopes

0YFA-00X

Make sure to flatten any curls on envelopes before loading them. Also pay attention to the orientation of envelopes

and which side is face up.

Before Loading Envelopes(P. 38)
Loading Envelopes in the Drawer and Multi-Purpose Tray(P. 39)

This section explains how to load envelopes in the orientation you want, as well as preparations that you need

to complete before loading envelopes. For a complete description of the procedure for loading envelopes in the

drawer or multi-purpose tray, see the following.

Loading Paper in the Drawer(P. 32)

Loading Paper in the Multi-Purpose Tray(P. 35)

Before Loading Envelopes

Follow the procedure below to prepare the envelopes before loading.

When loading in the multi-purpose tray, only one envelope can be loaded at a time. Note that the preparations

described in steps 1 to 3 below are necessary.

Close the flap of each envelope.

Press down to expel air from the envelopes and make sure that the folds on all four
sides are sharp and that the stack is flat.

Remove curls by flexing the stiff sections at the four corners.

Basic Operations

Summary of Contents for i-SENSYS LBP151dw
















































































































































































































































































































































Search results

Summary of Contents for i-SENSYS LBP151dw

Reviews:

Related manuals for i-SENSYS LBP151dw

Brands by name

Popular brands

Canon i-SENSYS LBP151dw, User Manual

Search results

Summary of Contents for i-SENSYS LBP151dw

Reviews:

Related manuals for i-SENSYS LBP151dw

Brands by name

Popular brands