Canon HD XS HJ14ex4.3B, Operation Manual

Page: 44 / 110

E12
1
When IASE S or IASE-C S type lens is used, set the focus op-
eration change-over knob to MANU. position.
When using the IASE S or IASE-C S type lens, the camera
can be damaged if excessive force is used to try to turn the
focus ring when the knob is left in the SERVO position.
2
Turn the focus ring to bring the near or far object into focus.
5-2. FOCUS OPERATION
5-2-1. Manual Focus Operation
ZOOM FOCUS
REMOTE1 REMOTE2/
VIRTUAL REMOTE3
MANU. SERVO MANU. SERVO
Focus Operation Change-over Knob
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ft
m
ڦ
ڦ
ڦ
ڦ
ڦ
Far
Near
Focus Ring
5-3. EXTENDER OPERATION
1x
2x
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ ڦ
ڦ
ڦ
M
Extender Lever
Slide the iris operation mode change-over switch to the
“
A
”
position.
The iris operation is performed automatically by the instruction from the
camera, to keep the video signal level constant.
IR
IS
I.G
.
A
M
T
W
Iris Operation Mode
Change-over Switch
5-4. IRIS OPERATION
The iris operation mode can be switched between auto and manual with the iris operation mode
change-over switch.
5-4-1. Automatic Iris Operation
5-2-2. Servo Focus Operation
The lens with built-in extender has the built-in 2x extender.
Use the extender lever to switch between 1x and 2x.
When the extender is used, note that the light quantity may decrease
by the
z oom ratio depending on the iris correction setting.
1
When IASE S or IASE-C S type lens is used, set the focus
operation change-over knob to SERVO position.
2
Mount the accessory such as focus demand. For the details, refer
to the operation manual of accessories.
5 OPERATION
ZOOM FOCUS
REMOTE1 REMOTE2/
VIRTUAL REMOTE3
MANU. SERVO MANU. SERVO
Focus Operation Change-over Knob