CHAPTER 4 SERVICE MODE
4-58
PD-ME
Executes density auto correction for text or text/photo
mode (reads the PD-DENS output).
n
Operation
1) Place the PD-DENS output on the cupboard glass as
follows:
•
Place it so that its printed side faces down.
•
Place it so that the whiter (lighter) side of the 15
gradations is toward the vertical size plate.
•
Place it with reference to the V marking in the rear left
of the copyboard glass.
2) Select <PD-ME> to highlight; then, press the OK key.
The scanning lamp turns on and off 13 times to make
scans.
•
OK is shown to indicate that the execution ended
successfully; if NG, perform "If PD-ME/DZ-ME is NG"
on p. 2-23.
In practice, place
it so that the printed
side is down.
PD-DENS output