Chapter 4
4-11
NO : Replace the finisher controller PCB.
4.4.1.7
E535;Swing motor error
0009-2594
Swing home position sensor (PI105)
1) Check the swing home position sensor. Does the sensor operate normally?
NO : Replace the sensor.
Wiring
2) Is the wiring between the finisher controller PCB and swing motor normal?
NO : Repair the wiring.
Swing mechanism
3) Is there any abnormality in the swing machanism?
YES : Repair the swing mechanism.
Swing motor (M106)/Finisher controller PCB
4) Does it improve when the swing motor is replaced?
YES : End
NO : Replace the finisher controller PCB.
4.4.1.8
E537;Rear aligning plate motor error
0009-2595
Rear aligning plate home position sensor (PI107)
1) Check the rear aligning plate home position sensor. Does the sensor operate normally?
NO : Replace the sensor.
Wiring
2) Is the wiring between the finisher controller PCB and rear aligning plate motor normal?
NO : Repair the wiring.
Rear aligning plate
3) Is there mechanical trapping in the path of the aligning plate?
YES : Repair the mechanism.
Rear aligning plate motor (M104)/Finisher controller PCB
4) Does it improve when the rear aligning plate motor is replaced?
YES : End
NO : Replace the finisher controller PCB.
4.4.1.9
E540;Tray 1 shift motor error
0009-2596
Tray 1 paper surface sensor (PI114)
1) Check the tray 1 paper surface sensor. Does it operate normally?
NO : Replace the sensor.
Tray 1 shift area sensor PCB
2) Check the tray 1 shift area sensors 1 to 3. Do the sensors operate normally?
NO : Replace the tray 1 shift area sensor PCB.
Wiring
3) Is the wiring between the finisher controller PCB and tray 1 shift motor normal?
Summary of Contents for Finisher-T1
