Canon Finisher-T1, Service Manual

Page: 78 / 174

Chapter 3
3-16
F-3-59
3.2.2.10 Removing the Swing
Unit
0009-3658
1)Remove two screws [1] and remove the solenoid
cover [2].
F-3-60
2) Remove screw [1] and pull up the swing pressure
guide [2].
F-3-61
3) Remove two E rings [1] at the joint between the
swing unit and the return roller unit and then slide the
two return roller unit collars [2] inside.
4) Unhook the swing pressure rack [3] from the swing
unit center hook.
F-3-62
5) Remove the belt [1] from the gear [2], remove the
belt [3] from the gear [2] and gear [4], and pull out the
swing unit [5] from the delivery direction.
[4]
[3] [3]
[2]
[1]
[2] [1]
[1]
[2]
[1]
[3]
[1]
[2]
[1]
[2]