Canon Finisher-T1, Portable Manual

Page: 26 / 66

to the rear aligning plate, and press SW103 once (stapling action/store adjustment value) and proceed to step 11).
9) To adjust the staple position, press SW101 or SW102 on the finisher controller PCB and adjust the staple
position.
When SW101 is pressed, staple position moves 0.49 mm forward.
When SW102 is pressed, staple position moves 0.49 mm backward.
10) Repeat steps 5) and 6) and check that the staple position is adjusted correctly.
11) Turn off all bits of SW104 on the finisher controller PCB.
12) Turn off the power of the host machine and install the rear cover of the finisher unit.