background image

3-10

Registering Information

Chapter 3

If you selected 

ON

in step 8:

9

Press Set to register your selection.

10

Press Set to select 

START DATE/TIME

.

11

Press Set and press 

or 

¨

to select the month 

when the daylight saving time starts, and press 
Set to register your selection.

n

If you want to change your selection after pressing 

Set

, press 

¨

to return to your previous

selection, make the necessary changes and press 

Set

.

12

Press Set and press 

or 

¨

to select the week

when the daylight saving time starts, and press Set
register your selection.

• You can select from the following:

FIRST WEEK

SECOND WEEK

THIRD WEEK

FOURTH WEEK

LAST WEEK

(fifth week)

13

Press Set and press 

or 

¨

to select the day 

of the week when the daylight saving time starts, 
and press Set to register your selection.

14

Press Set and use the numeric buttons to 
enter the time when the daylight saving time 
compensation is made, and press Set to 
register your selection.

• Use the 24-hour format for the time (e.g. 2:00 p.m. as 

14:00) and precede single digits with a zero.

n

If you make a mistake while entering the time, press Clear to clear your entry and enter the
correct time. You can also use 

¬

or 

®

to move the cursor under the incorrect number and enter

the correct number.

02:00

02:00

TIME

SUNDAY

SUNDAY

DAY

FIRST WEEK

FIRST WEEK

WEEK

APRIL

APRIL

MONTH

START DATE/TIME

Summary of Contents for FAXPHONE L80












































































































































































































Reviews: