Canon FaxPhone L120, Software Manual, Page: 48 / 85

1
2
3
4
TOP
Back Previous Next
2-33
Introduction
Printing
Troubleshooting
Appendix
Table of Contents
Index
[Watermark List] Displays the names of registered
watermarks. The preview image in the upper
left part of the dialog box displays the
selected watermark with the specified
settings reflected.
[Add] Registers a new watermark. Clicking this
button adds a blank name field in
[Watermark List] in which you enter the
name of watermark to be registered. Up to
50 watermarks can be registered.
[Delete] Removes the selected watermark from
[Watermark List].
NOTE
You cannot delete a pre-defined watermark or a watermark
selected in the [Page Setup] tab.
[Position] Specifies the position where the watermark
is printed on each page. You can enter the
values in the [X] and [Y] edit boxes (in a
range between –50 and 50), or use the X
and Y slide bars to move the position.
[Move to Center] Relocates the watermark to the center of the
page.
[Angle] Sets the angle of watermark. ([Upward Left
to Right], [Downward Left to Right], or [Set
Angle]). You can select the corresponding
radio button, or use the slide bar to move the
angle, or enter a desired value in the [Set
Angle] edit box (in a range between -180
and 180).
[Name] Displays the name of the currently selected
watermark.
[Text] Displays the text string of the currently
selected watermark.
[Font] Selects the font type of the watermark.
[Style] Selects the font style of the watermark.
Available styles are [Regular], [Italic], [Bold]
and [Bold Italic].
[Size] Specifies the font size of the watermark (1 to
500).
[Color] Selects the font color of the watermark.
[Border] Adds the frame to the watermark. You can
select the frame type ([Circle], [Rectangle],
or [None]).
[Print Style] Selects the type of watermark ([Transparent]
or [Overlap]).
[Print on First
Page Only] Prints the selected watermark only on the
first page of the document.
NOTE
Some settings are not available for pre-defined watermarks.