Canon FAXPHONE B160 User Manual Download Page 20

Page: 20 / 139

1-9

Installing the BJ cartridge

SETTING UP

Installing the BJ cartridge in your fax ___________

When there is no BJ cartridge installed in your fax, PUT IN CARTRIDGE is displayed on the LCD.

Follow the procedure below to install the BJ cartridge.

Make sure the fax is plugged in.

Open the printer cover using the printer
cover tab. (see p. 2-2)

Raise the blue cartridge lock lever on the
cartridge holder.

Remove the BJ cartridge from its
package, then remove the orange
protective cap

and tape

• Discard the cap and tape. Never attempt to reattach

them to the BJ cartridge print head.

• Install the BJ cartridge immediately after removing the

cap and tape.

Cartridge

Do not touch
thes precision
compontents

When you plug in the fax for the first time, the
cartridge holder automatically moves to the
centre of the fax so you can install the BJ
cartridge. If this does not happen, press
[Cartridge].

Summary of Contents for FAXPHONE B160












































































































































Search results

Summary of Contents for FAXPHONE B160

Reviews:

Related manuals for FAXPHONE B160

Brands by name

Popular brands

Canon FAXPHONE B160, User Manual

Search results

Summary of Contents for FAXPHONE B160

Reviews:

Related manuals for FAXPHONE B160

Brands by name

Popular brands