24
36
“Quotient” (Q) is the result in a division problem, “Remainder”
(r) is the value remaining in an integer division problem.
The calculated Quotient value (Q) and Remainder (r) will be
stored into memory variables “C” and “D”, automatically
assigned.
In Maths mode, press or to scroll through a long
calculation result.
In Line mode, the Quotient value (Q) and Remainder (r) will
be shown over 2 lines.
Only the Quotient value (Q) can continue to be used for the
next calculation or be stored into memory variables.
With polar coordinates, you can calculate and Display θ
within the range of –180º < θ ≤ 180º. (Same as Radian and
Gradient)
In Maths mode, press or to scroll the through
calculation result.
In Line mode, (x,y) or (r, θ) will be shown over 2 lines.
After conversion, the results will automatically be assigned
to memory variables X and Y. Press or to show
the results.
35 ÷ 10 = 3 x 10 +5
Q=3
R=5
Quotient value (Q) + 3
= 6
Recall Quotient
value (Q)
Recall Remainder
value (r)
Q…r(35, 10
Q=
3
R=
5
Ans+3
6
C
3
D
5
Display
Key in operation
Example
Rectangular Coordinates
(Rec)
Polar Coordinates (Pol)
LINE MODE:
NOTE:
• During any calculation operations, pressing or
or or will exit the prime factorization result
display.
• Use the setup menu to change the angle unit setting
(Deg, Rad, Gra) or display digit setting (Fix, Sci, Norm).
• [Math ERROR] will be shown if decimal value, fraction,
negative value calculation result, or Pol, Rec, Q...R is
displayed.
Apps
Quotient and Remainder Calculations
Coordinate Conversion
