Canon EOS Rebel T6 Instruction Manual Download Page 172

Page: 172 / 326

Shooting Video Snapshots

172

Options in Steps 4 and 5

[Playback video snapshot] Operations

* With [

Skip backward

] and [

Skip forward

], the skipping length corresponds to the

number of seconds set under [

Video snapshot

] (approx. 2 sec., 4 sec., or 8 sec.).

Function

Description

Save as album

(Step 4)

The movie clip will be saved as the video snapshot
album’s first video snapshot.

Add to album

(Step 5)

The video snapshot just recorded will be added to
the album recorded immediately before.

Save as a new album

(Step 5)

A new video snapshot album is created and the
movie clip is saved as the first video snapshot. Select
[

] on the confirmation dialog. The new album will

be a different file from the previously recorded album.

Playback video snapshot

(Step 4 and 5)

The video snapshot just recorded will be played
back. For playback operations, see the table below.

Do not save to album

(Step 4)

Delete without saving

to album

(Step 5)

The video snapshot just recorded will be erased
instead of being saved to the album. Select [

] on

the confirmation dialog.

Function

Playback Description

Exit

The previous screen will reappear.

Play

By pressing <

>, you can play back or pause the video

snapshot recorded immediately before.

First frame

Displays the first scene of the album’s first video snapshot.

Skip backward*

Each time you press <

>, the video snapshot skips back

by a few seconds.

Previous frame

Each time you press <

>, the previous frame is

displayed. If you hold down <

>, it will rewind the movie.

Next frame

Each time you press <

>, the movie will play frame-by-

frame. If you hold down <

>, it will fast forward the movie.

Skip forward*

Each time you press <

>, the video snapshot skips

forward by a few seconds.

Last frame

Displays the last scene of the album’s last video snapshot.
Playback position

mm' ss"

Playback time (minutes:seconds)

Volume

Turn the <

> dial to adjust the volume of the built-in

speaker (p.218).

Summary of Contents for EOS Rebel T6







































































































































































































































































































































Search results

Summary of Contents for EOS Rebel T6

Reviews:

Related manuals for EOS Rebel T6

Brands by name

Popular brands

Canon EOS Rebel T6, Instruction Manual

Search results

Summary of Contents for EOS Rebel T6

Reviews:

Related manuals for EOS Rebel T6

Brands by name

Popular brands