Canon EOS M2, Basic Instruction Manual

Page: 27 / 116

27
Installing and Removing the Battery and Card
5
Check the number of possible shots.

When you set the power to <
1
>, the
remaining number of images you can
record to the card will be displayed on the
LCD monitor.
1
Set the power to <
2
>.
2 Open the cover.

Make sure the LCD monitor and
access lamp are off, then open the
cover.

If [ Recording... ] is displayed, close the
cover.
3 Remove the battery.

Press the battery lock lever as shown by
the arrow and remove the battery.

To prevent short circuiting of the battery
contacts, be sure to attach the provided
protective cover (p.24) to the battery.
4
Remove the card.

Gently push in the card, then let go to
eject it.

Pull the card straight out.
5
Close the cover.

Press the cover until it snaps shut.
Possible shots
Removing the Battery and Card