15
Name
s
of Part
s
IMPORTANT
• Do not use tripods and other accessories with mounting screws exceeding the depth of the screw holes on
the camera as this may damage the camera.
• Mounting the camera on a tripod using only one of the 1/4"-20 screw holes for tripod reinforcement may
damage the camera.
Locking the camera’
s
control
s
(key lock)
You can set the
Q
switch to
C
(key lock) to lock all the camera’s buttons* and switches. This is useful
in preventing settings from being changed due to inadvertently pressing one of the buttons. Set the
Q
switch back to CAMERA to reactivate the controls.
When the camera’s controls are locked, you can still operate the camera using an RC-V100 Remote
Controller or the Browser Remote application.
* REC buttons are not locked by default but you can choose to lock them too (
A
171).
1
2
3
8
7
9
10
11
4
5
6
1
Tape measure hook and
focal plane mark
Use the hook to accurately measure the distance
from the focal plane.
2
Accessory shoe with socket for 1/4"-20 mounting
screws (9.2 mm (0.36 in.) deep)
3
Q
switch
Set to CAMERA to turn on the camera (the power
indicator/tally lamp illuminates in green) or to OFF
to turn it off
(the power indicator/tally lamp goes
out).
4
MEDIA button (
A
When the camera is on, press to toggle the
camera between CAMERA mode (shooting) and
MEDIA mode (playback).
5
SLOT SELECT (card selection) button (
A
6
SD CARD access indicator:
/
(
A
7
Power cord clamp (unplugging prevention)
(
A
20)
8
Exhaust ventilation outlet (
A
9
Socket for tripod’s anti-rotation pin
(5.6 mm (0.22 in.) deep)
10 Screw holes for tripod reinforcements and
accessories with 1/4"-20 mounting screws
(8.9 mm (0.35 in.) deep, x2)
11 Screw hole for 3/8"-16 mounting screws
(10 mm (0.39 in.) deep)
Summary of Contents for EOS C70
Page 1: ...Digital Cinema Camera Instruction Manual PUB DIE 0551 000 ...
Page 4: ...4 ...
Page 8: ...8 ...
Page 118: ...Saving and Loading Menu Settings 118 ...