Canon EOS C70 Instruction Manual Download

Page: 32 / 215

Preparing Recording Media

erting and Removing an SD Card

1 Wait until the

D CARD acce

indicator i

off or i

illuminated in green.

2 Open the card compartment cover.

3 In

ert the card

traight, with the label facing the

ide

oppo

ite to the len

, into the

D card

lot until it clic

• You can use two cards, one in each card slot.

• To remove the card, make sure the SD CARD indicator is off

and then push the card once to release it. When the card
springs out, pull it all the way out.

4 Clo

e the card compartment cover.

• Do not force the cover closed if the card is not correctly

inserted.

D card acce

indicator

If you set

> [

System Setup] > [SD Card Access LED] to [Off], the SD card access indicator will not

illuminate.

IMPORTANT

• SD cards have front and back sides that are not interchangeable. Inserting a card facing the wrong direction

can cause a malfunction of the camera. Be sure to insert the card as shown in the illustration.

Initializing Card

Initialize cards when you use them with this camera for the first time. You can also initialize a card to permanently
delete all the recordings it contains.

elect

> [

Recording/Media

etup] > [Initialize Media].

elect the de

ired card.

elect [OK].

• The card is initialized and all the data it contains is erased.

IMPORTANT

• SD cards are initialized using the FAT file system, SDHC cards using the FAT32 file system, and SDXC cards

using the exFAT file system.

• Initializing a card will permanently erase all data, including photos and protected custom picture files. Lost data

cannot be recovered. Make sure you save important recordings in advance.

Indicator

Card status

Red

Accessing the card.

Green

Recording/playback is possible and the card is selected for recording/playback.

Off

A card is not inserted or the card slot is not currently selected.

햴

햲

햳

햵

SD CARD
indicator

Summary of Contents for EOS C70
























































































































































































































Search results

Summary of Contents for EOS C70

Reviews:

Related manuals for EOS C70

Brands by name

Popular brands

Canon EOS C70, Instruction Manual

Search results

Summary of Contents for EOS C70

Reviews:

Related manuals for EOS C70

Brands by name

Popular brands