Canon EOS C300 Mark III, Manual

Page: 161 / 254

7
161
Network Functions
About the Network Functions
To be able to use the following network functions, you will need to attach an optional WFT-E9 Wireless File
Transmitter to the system expansion terminal and connect to a Wi-Fi network, or attach an optional EU-V1
Expansion Unit 1 or EU-V2 Expansion Unit 2 to the camera and use the (Ethernet) terminal on the EU-V1 or
EU-V2 to connect to a wired (Ethernet) network. For details about the accessories and how to attach them, refer
to the Cinema EOS System Expansion User Guide.
Network functions and connection types
1
Connection to a Wi-Fi network via an external access point (wireless router, etc.)
2
Direct connection to one Wi-Fi-enabled device where the camera serves as the Wi-Fi access point.
Before using the network functions
• The instructions in this chapter assume you already have a correctly configured and working network and
correctly configured network device(s). If necessary, refer to the documentation provided with the network
devices you plan to use.
• Configuring the network settings requires adequate knowledge about configuring and using wired (Ethernet)
and/or wireless (Wi-Fi) networks. Canon cannot provide support regarding network configurations.
IMPORTANT
• Canon shall not be liable for any loss of data or damage resulting from incorrect network configuration or
settings. Additionally, Canon shall not be liable for any loss or damage caused by the use of network functions.
• Avoid using open networks or networks without sufficiently strong security settings. Using an unprotected
network can expose your data to monitoring by unauthorized third parties.
NOTES
• Do not open the card compartment cover while using network functions.
• Do not place cables connected to the camera’s terminals near the optional WFT-E9 Wireless File Transmitter.
Doing so may negatively affect the wireless communication over Wi-Fi.
Network function Description
Wired network
(Ethernet)
Wi-Fi
A
Infrastructure
1
Camera Access
Point
2
FTP File Transfer
Transfer clips recorded with the camera to
another device connected to the network
using the FTP protocol.
Ü Ü
Ü
178
IP Streaming
Stream the camera’s live video and audio over
IP to a compatible IP video decoder connected
to the network.
– 179
Browser Remote
Control the camera remotely from the Web
browser of a connected device.
Ü
181
XC Protocol
Control the camera remotely using a
controller compatible with the XC Protocol via
an IP connection.
Ü
188