Canon EOS 80D (W), Basic Instruction Manual

Page: 146 / 308

3
Setting Noise Reduction
N
144
Cautions for Setting Multi Shot Noise Reduction

If there is significant misalignment in the image due to camera shake, the
noise reduction effect may become smaller.

If you are handholding the camera, keep it steady to prevent camera
shake. Using a tripod is recommended.

If you shoot a moving subject, the moving subject may leave
afterimages.

The image alignment may not function properly with repetitive patterns
(lattice, stripes, etc.) or flat, single-tone images.

If the subject’s brightness changes as the four consecutive shots are
taken, irregular exposure in the image may result.

After shooting, it may take some time to record an image to the card for
noise reduction and merging the images. During the processing of the
images, “
buSY ” will be displayed in the viewfinder and on the LCD panel,
and you cannot take another picture until the processing is completed.

You cannot use AEB and WB bracketing.

If [
z
3: Long exp. noise reduction ], [
z
3: Multiple exposure ], [
z
3:
HDR Mode ], AEB, or WB bracketing is set, [ Multi Shot Noise
Reduction ] cannot be set.

You cannot set [ Multi Shot Noise Reduction ] for bulb exposures or
movie shooting.

Flash shooting is not possible. The AF-assist beam will be emitted
according to the [
8
C.Fn II -6: AF-assist beam firing ] setting.

If you turn off the power, change the shooting mode to a Basic Zone
mode or <
F
>, or switch to movie shooting, the setting will automatically
switch to [ Standard ].