Canon EOS 77D Instruction Manual Download Page 363

Page: 363 / 502

363

Playing Back Movies

Movie Playback Panel

* When background music is set, the movie sound will not be played back.

Operation

Playback Description

Play

Pressing <

> toggles between play and stop.

Slow motion

Adjust the slow motion speed by pressing the <

> <

keys. The slow motion speed is indicated on the upper
right of the screen.

First frame

Displays the movie’s first frame.

Previous frame

Displays the previous frame each time you press <

Holding <

> down will rewind the movie.

Next frame

Plays the movie frame-by-frame each time you press
<

>. Holding <

> down will fast forward the movie.

Last frame

Displays the movie’s last frame.

Background

music*

Plays back a movie with the selected background music
(p.368).

Edit

Displays the editing screen (p.364).
Playback position

mm’ ss”

Playback time (minutes:seconds)

Volume

Turn the <

> dial to adjust the volume of the built-in

speaker (p.362).

Press the <

> button to return to the single-image

display.



With a fully-charged Battery Pack LP-E17, the continuous playback time
at room temperature (23°C/73°F) will be approx. 2 hr. 50 min.



If you connect the camera to a TV set to play a movie (p.369), adjust the
sound volume with the TV set. (Turning the <

> dial will not change

the sound volume.)

Summary of Contents for EOS 77D























































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 77D

Reviews:

Related manuals for EOS 77D

Brands by name

Popular brands

Canon EOS 77D, Instruction Manual

Search results

Summary of Contents for EOS 77D

Reviews:

Related manuals for EOS 77D

Brands by name

Popular brands