Canon EOS-1D C, Instruction Manual

Page: 159 / 420

159
3
Creating and Selecting a Folder
With the folder selection screen
displayed, turn the <
5
> dial to select
the desired folder, then press <
0
>.
X The folder where the captured
images will be saved is selected.
Subsequent captured images will be
recorded into the selected folder.
Selecting a Folder
Number of images
in folder
Folder name
Lowest file number
Highest file number
About Folders
As with “ 100EOS1D ” for example, the folder name starts with three digits (the
folder number) followed by five alphanumeric characters. A folder can contain
up to 9999 images (file number 0001 - 9999). When a folder becomes full, a
new folder with the folder number increased by one is created automatically.
Also, if manual reset (p.163) is executed, a new folder will be created
automatically. Folders numbered from 100 to 999 can be created.
Creating Folders with a Personal Computer
With the card open on the screen, create a new folder named “ DCIM ”. Open
the DCIM folder and create as many folders as necessary to save and
organize your images. The folder name must follow the format “
100ABC_D ”.
The first three digits are the folder number, from 100 to 999. The final five
characters can be any combination of upper- and lower-case letters from A to
Z, numerals, and the underscore “_”. The space cannot be used. Also note
that two folder names cannot share the same three-digit folder number (for
example, “
100ABC_D ” and “ 100W_XYZ ”), even if the other five characters in
each name are different.
COP
Y