Canon EOS-1 D X, Owner'S Manual

Page: 37 / 420

37
Installing and Removing the Card
1
Open the cover.
Set the power switch to <
2
>.
Make sure the access lamp is off,
then open the cover.
If [ Recording... ] is displayed, close
the cover.
2
Remove the card.
Push the eject button to eject the
card.
Pull the card straight out, then close
the cover.
Removing the Card
Access lamp
When the access lamp is lit or blinking, it indicates that images are
being written to or read by the card, being erased, or data is being
transferred. Do not open the card slot cover during this time. Also,
never do any of the following while the access lamp is lit or
blinking. Otherwise, it can damage the image data, card, or camera.
• Removing the card.
• Removing the battery.
• Shaking or banging the camera around.
If the card already contains recorded images, the image number may not
start from 0001 (p.158).
If a card-related error message is displayed on the LCD monitor, remove
and reinsert the card. If the error persists, use a different card. If you can
transfer all the images on the card to a computer, transfer all the images
and then format the card with the camera (p.55). The card may then
return to normal.
COP
Y