239
The time code is a time reference
recorded automatically to synchronize
the video and audio during movie
shooting. It is recorded at all times in the
following units: hours, minutes, seconds,
and frames. It is mainly used during
movie editing.
Set the time code with [
z
5: Time code
].
[
Rec run
]
: The time code counts up only while you are shooting
a movie.
[
Free run
]
: The time code counts up whether you are shooting or
not.
You can set the time code’s start time.
[
Manual input setting
] : You can freely set the hour, minute, second,
and frame.
[
Reset
]
: The time set with [
Manual input setting
] and
[
Set to camera time
] is reset to 00:00:00:00.
[
Set to camera time
]
: Sets hours, minutes, and seconds to match
the camera’s internal clock. “Frames” will be
set to 00.
You can select what to display on the movie-shooting screen.
[
Rec time
]
: Indicates the elapsed time from the start of the movie
shooting.
[
Time code
]
: Indicates the time code during movie shooting.
3
Setting the Time Code
Count Up
Start Time Setting
Movie Recording Count
Shooting still photos during movie shooting will cause a discrepancy
between the actual time and time code.
If [
Free run
] is set and you change the time, zone, or daylight saving
time (p.40), the time code will be affected.
COP
Y
Summary of Contents for EOS-1 D X
