Canon elura50 Instruction Manual Download

Page: 107 / 174

107

Using a Memory Card

4. Press the PHOTO button fully down to record the still image.

•

disappears from the display. The shutter sound sounds and simultaneously

the display appears to close for an instant as if it were a shutter releasing.

• The card access indicator flashes and the card access display appears in the

display. (see “The indicators that appear in the LCD display when LCD
MIRROR is turned on” on page 28).

Notes:

• To use the self-timer (

71), set the self-timer before step 3, and then press the

PHOTO button fully down.

• The wireless controller’s PHOTO button has no half-way setting. Press the

button fully and the camcorder immediately takes the image.

>>>>

1024

320

FINE

Image quality (

102)

Backup battery
(

147)

Remaining battery power
(

146)

Number of images that can
still be recorded on the
memory card

File size of still images and
movies (

102)

The indicators that appear in the display when recording to a memory card:

Summary of Contents for elura50















































































































































































Search results

Summary of Contents for elura50

Reviews:

Related manuals for elura50

Brands by name

Popular brands

Canon elura50, Instruction Manual

Search results

Summary of Contents for elura50

Reviews:

Related manuals for elura50

Brands by name

Popular brands