Canon elura50 Instruction Manual Download

Page: 101 / 174

101

Using a Memory Card

You can use

SD Memory Cards or a

commercially available MultiMediaCards
with this camcorder. The SD Memory Card
has a protect switch for prevent accidental
erasure.

Cautions:

• This camcorder is compatible with SD Memory Cards or MultiMediaCards

only. Do not use any other types of memory cards.

• Turn off the camcorder before inserting or removing the memory card.

Otherwise it may result in data damage.

• Do not touch the memory card terminals.
• If you use memory cards other than the supplied one, make sure to format them

with the camcorder (

139).

• For instructions on how to connect the camcorder to the computer, see

Connecting to a Computer using a USB Cable (

140).

Inserting and Removing the Memory Card

Terminals

Protect
switch

Inserting the Card

Card access
indicator

1. Turn off the camcorder.

2. Open the cover.

3. Insert the memory card all the way into the memory card slot.

4. Close the cover.

• Do not close the cover forcefully without having the card correctly inserted.

Removing the Card

Do not forcefully remove the memory card without first pushing it in.

1. Turn off the camcorder.

• Make sure that the card access indicator is not flashing.

2. Open the cover.

3. Push the memory card to release it. Remove the memory card.

4. Close the cover.

Summary of Contents for elura50















































































































































































Search results

Summary of Contents for elura50

Reviews:

Related manuals for elura50

Brands by name

Popular brands

Canon elura50, Instruction Manual

Search results

Summary of Contents for elura50

Reviews:

Related manuals for elura50

Brands by name

Popular brands