S C A N N I N G B A S I C S
GETTING STARTED
This section explains the basic steps involved in scanning a
document. It assumes that the stack to be scanned contains papers
all of the same size and thickness. When working with the DR-
5020/5080C, you should always make sure that the scanner has been
turned ON before turning the computer ON.
S T E P
1
To prepare the DR-5020/5080C for document scanning, first pull out
the
document tray extension
from the scanner’s lower section and
the
document eject tray
from the scanner’s upper unit. A
paper
feed adjustment lever
is located underneath the scanner’s upper
unit; when working with standard paper, this lever should be set to the
left position (I).
2
The purpose of this Quick Reference is to provide a
concise overview of the DR-5020/5080C. It is designed
to supplement – not replace – the Instructions manual
included with the scanner. Please review the DR-
5020/5080C Instructions manual for key information
on safety precautions, installation procedures, and
maintenance guidelines.
▲▲
Paper feed adjustment lever
Document eject tray
Document tray extension
1
