Canon DIGITAL IXUS 430 User Manual Download Page 23

Page: 23 / 163

Prep

ring the

Camera

Installing the Battery Pack

Install Battery Pack NB-1LH (supplied) as shown below. Battery Pack NB-1L
can also be used with the camera.

Please recharge the battery pack (p. 18) before you use it for the first
time.

Slide the battery cover in the
direction of the arrows.

Press the battery lock while
inserting the battery pack all the
way in until the lock clicks.

• Insert the battery pack correctly by

aligning the arrows on the camera and the
battery pack.

• To remove the battery pack, press the

battery lock and pull the battery pack out.

Slide the battery cover closed.

Battery Lock

Summary of Contents for DIGITAL IXUS 430




































































































































































Search results

Summary of Contents for DIGITAL IXUS 430

Reviews:

Related manuals for DIGITAL IXUS 430

Brands by name

Popular brands

Canon DIGITAL IXUS 430, User Manual

Search results

Summary of Contents for DIGITAL IXUS 430

Reviews:

Related manuals for DIGITAL IXUS 430

Brands by name

Popular brands