Canon Digital IXUS 200 IS, User Manual

Page: 151 / 169

151
If you think there is a problem with the camera, first check the following. If
the items below do not solve your problem, contact a Canon Customer
Support Help Desk as listed on the included customer support list.
Power
You pressed the ON/OFF button, but nothing happened.
•
Confirm that the battery is properly inserted (p. 18) .
•
Confirm that the memory card/battery cover is securely closed (p. 18) .
•
If the battery terminals are dirty, battery performance will decrease. Clean the
terminals with a cotton swab and re-insert the battery several times.
Battery is consumed quickly.
•
Battery performance decreases at low temperatures. Warm the battery by
placing it, for example, in your pocket with the terminal cover on.
Lens will not retract.
•
Do not open the memory card/battery cover while the power is on. After closing
the memory card/battery cover, turn the power on then back off
(p. 18) .
TV output
Image is distorted or not showing on TV (p. 115) .
Shooting
Cannot shoot.
•
Set the mode switch to
A
or
4
(p. 42) .
•
When in Playback mode (p. 27) , press the shutter button halfway (p. 23) .
Screen does not display properly in dark places (p. 46) .
Screen does not display properly while shooting.
Please note, the following will not be recorded in still images, but will be recorded
in movies.
•
When the camera is subjected to powerful light sources, the display may
darken.
•
Under fluorescent lighting, the screen may flicker.
•
When shooting bright light sources, a bar of light (purplish red) may appear on
the screen. This may not be very noticeable if using exposure compensation
(p. 100) when shooting a movie.
h
appears on the screen and the shot cannot be taken even though the
shutter button was pressed fully (p. 26) .
appears when the shutter button was pressed halfway (p. 59) .
•
Set the [IS mode] to [Continuous] (p. 145) .
•
Set the flash to
h
(p. 69) .
•
Increase the ISO speed (p. 74) .
•
Attach the camera to a tripod.
Troubleshooting